- Supplied With Clips Already Attached to Panels
- Individiual Panels Are Easily Installed and Aligned
- Variety of Materials and Finishes Available With Short Lead Times
The Standard Wet Seal System has for years been the norm within the industry. It is easily installed and sealed with silicone sealant. CRL’s Series 100 Standard Wet Glaze System utilizes intermediate clips and accommodates rout-and-return composite panels or solid metal panels with a return lip. A typical installation consist of a barrier strip placed against the building substrate and covered with a 1/2" (12 mm) hat channel, this provides the attachment point for the staggered intermediate clips to attach to.
- Panels are Easily Installed and Aligned
- Expansion and Contraction is Accomodated Without Buckling or Stress
- Individual Panels May be Removed for Access and Maintenance
CRL’s 200 Series Deluxe Full Framed and Adjustable Wet Seal Panel System provides the extra strength required when large panels are being used. Interlocking mounting clips aid in panel-to-panel alignment, and at the same time allows for panel expansion and seismic movement without buckling or undue stress. By providing extruded aluminum entirely around the panel, extra rigidity affords panel sizes up to 60" (1524 mm)
x 168" (4267 mm).
- Welded Mounting Studs
- Mounting Extrusion Included
- Easy to Install
CRL’s 300 Series Heavy Plate Wet Seal Panel System utilizes threaded studs welded to the back of the plate. These studs secure a full length aluminum mounting extrusion to the back of the plate with nuts. The panels come with the mounting extrusion already attached, so all that is necessary is to align the panel on the substrate or hat channel and check to be sure the 1/2" (12 mm) joint is correct. This system is often used in geographic areas that are subject to severe weather conditions. The strength of the 1/4" (6.3 mm) plate is
less subject to damage and can withstand most conditions.