05 7300 Frameless Glass Railing Systems, Handrails, and Balustrades

05 7310 CRL GRS TAPER-LOC® Dry Glaze Glass Railing System
For 1/2" to 3/4" (12 to 19 mm) Monolithic Tempered Glass, Supports All Mounting Methods
  • First and Only ICC-Approved Base Shoe System ESR-3269
  • Reduces Installation Time by 50%
  • Meets and Exceeds IBC Standards
  • Easily Allows You to Remove, Adjust or Replace Glass Panels
  • “Most Innovative Commercial Hardware Product” -Glass Magazine
  • “Editor’s Choice” -Architectural Record

With CRL’s ® System, no longer is messy cement required. Our System not only self-centers the glass, but plumbs it as well, and is all done from the floor side of the railing. Designed for Interior and Exterior Applications, and available in eight architectural finishes.

U.S. Patent Numbers 8,122,654 & 8,201,366 and Commonwealth of Australia Patent No. 2008207524

05 7310 CRL GRS TAPER-LOC® Dry Glaze Tempered Laminated Glass Guard Rail System
For 9/16", 11/16", 27/32", and 1-1/16" (13.52, 17.52, 21.52, and 25.52 mm) Laminated Tempered Glass Using Dupont™ SentryGlas®
  • First and Only ICC-Approved Base Shoe System ESR-3842
  • IBC 2015 Section 2407 Compliant
  • The Safest and Strongest Glass Railing System on the Market
  • Unprecedented Load and Impact Performance, Large Missile Impact Tested

CRL’s GRS Tempered Laminated Glass Systems are unlike anything else on the market. This is by far the safest frameless glass railing system sold today. It meets the strictest international building code requirements for loads and impacts and is also completely dry glazed. That means the systems will not delaminate, creep and or discolor over time.  With three tempered laminated glass thickness’s to choose from this system will not only satisfy your needs for safety and security it will give you all glass look you want.

U.S. Patent Numbers 8,122,654 & 8,201,366 and Commonwealth of Australia Patent No. 2008207524

 
05 7310 CRL GRS Wet Glaze Railing System
For 1/2" to 3/4" (12 to 19 mm) Monolithic Tempered Glass
  • First and Only ICC-Approved Glass Railing System ESR-3269
  • A Tried and True Method to Secure Lites of Glass Into Base Shoe
  • Alternative to Our TAPER-LOC® Dry Glaze System
  • Designed for Interior and Exterior Applications
  • Meets and Exceeds Code Standards

installations basically secure lites of 1/2" to 3/4" (12 to 19 mm) tempered in engineered and approved Base Shoes with expanding cement. Test results and engineering calculations show that the strength of our Base Shoe Extrusion and selected fasteners that were tested exceed the Regulations for loading criteria by a factor of four.

05 7310 CRL-Blumcraft® BGR Wet Glaze Glass Railing System
For 1/2" and 3/4" (12 and 19 mm) Monolithic Tempered Glass
  • Two Piece Mounting Base Isolates Glass Panels Against Shock of Building Movement
  • Permits Easy Glass Panel Replacement By Means of Bolts
  • Wet Glazed System Only
  • Railglass® Factory Controlled Bonding of Glass is Available

CRL-Blumcraft’s® Two Piece Base Shoe Systems are offered in and profiles with or without factory installed 1/2" or 3/4" (12 or 19 mm) glass panels. The systems permit easy glass panel installation and replacement by means of bolts. CRL-Blumcraft’s® Glass Railing Systems are designed to meet and exceed typical code requirements for guard rail applications.

05 7310 CRL EGR Elevated Glass Railing System
For 1/2" (12 mm) Monolithic Tempered Glass
  • Provides Excellent Drainage Capability for Residential or Commercial Applications
  • Excellent for High-Rise Balconies
  • Meets or Exceeds Code Standards
  • Seven Standard Powder Coated Finishes, Plus Custom Finishes Also Available

CRL’s EGR Elevated Glass Railing System was designed for those applications that require substantial clearance underneath the Base Shoe for drainage, such as the balconies of high-rise hotels or condominiums. The EGR System allows water and debris to escape beneath the Base Shoe, and not dam up over time. This attractive system will meet these requirements and, at the same time, look good doing it.

05 7310 CRL SRS Standoff Glass Railing System
For 1/2", 3/4", 9/16", and 27/32" (12, 19, 13.52, and 21.52 mm) Monolithic and Laminated Tempered Glass
  • Exterior and Interior Applications
  • Compact Design for Minimal Obstruction
  • Designed for , Stairway, and Ramp Areas
  • Meets or Exceeds Requirements

CRL’s high quality commercial and residential Standoff Railing System is manufactured to meet or exceed applicable building code requirements. This system can be designed to be mounted to almost any approved substrate. Utilizing our state-of-the-art manufacturing facility we can produce almost any desired design to meet your project specifications.

05 7310 CRL FSC Frameless Glass Clamp Railing System
For 3/8", 1/2", and 9/16" (10, 12, and 13.52 mm) Monolithic and Laminated Tempered Glass
  • Great for Pool Fencing, Balcony, and Deck Applications
  • Available in 316 Alloy and Duplex 2205 Marine Grade Stainless Steel
  • Also Known as Spiggots

Our Frameless Glass Clamp Railing System provides an almost invisible "frameless" look. No vertical posts are used between the panels of glass; they are solely supported from the bottom by high strength stainless steel clamps. Their quality 316 alloy stainless steel construction provides superior weather resistance, and there are two models made of Duplex 2205 Marine Grade Stainless for installations within one mile of saltwater environments. Core, side, and surface mount models give you a choice of installation options. All models are available in a brushed stainless finish, and some are also available in a polished finish.

05 7310 CRL-Blumcraft® Free Standing Glass Gate Post Systems
For 1/2" ( 12 mm) Monolithic Tempered Glass
  • Gates Completely Built and Assembled by CRL-Blumcraft to Customer’s Specifications
  • All CRL-Blumcraft Hand Rails are Applicable

CRL-Blumcraft® Free Standing Glass Gate Posts are installed in many prestigious buildings throughout North America. Years of experience in the field have resulted in glass gates of unparalleled quality and design excellence, featuring more glass and less metal. The gates operate on the principle of being anchored to the floor only. The gates are designed for use with 1/2" (12 mm) thick tempered glass and can be plumbed, leveled, and adjusted after installation.

05 7310 CRL GRS Glass Gate Systems
For 1/2", 5/8" or 3/4" (12, 16 or 19 mm) Monolithic Tempered Glass
  • Heavy-Duty Glass Gate With Optional Cap Rail
  • Beautiful in Design and Functional in Operation
  • Gate Can Be Adjusted In and Out at Both the Top and the Bottom
  • Custom Fabricated to Meet Your Design Requirements

We have developed a series of Swinging Gates for commercial or residential use, either alone or with our GRS Glass Rail System. The gates are an offshoot of our Wedge-Lock™ Door Rail System, and can be combined with our GRS s. The top of the Gate pivots on a heavy-duty ball bearing, while the bottom pivots on a floor mounted commercial door closer. The floor closer always returns the Gate to the closed position, and the closing speed is adjustable. All Swinging Gates are custom fabricated to your specifications.

05 7310 CRL GRS 1202 Series Swinging Glass Gate Systems
For 3/8" or 1/2" (10 or 12 mm) Tempered Glass
  • Unique Closing Device Located in Vertical Post
  • Heavy-Duty Glass Gate With Optional Cap Rail
  • Beautiful in Design and Functional in Operation
  • Custom Fabricated to Meet Your Design Requirements

The GRS 1202 Series Gate Systems are an offshoot of our Wedge-Lock™ Door Rail System, and can be combined with our GRS Cap Rails. The top and bottom of the Gate swings on heavy-duty ball bearing pivots. Our engineers have designed a unique In-Rail Closing Mechanism which is concealed in the vertical post, eliminating the need for large enclosures in the floor. The closer always returns the Gate to the closed position, and the closing speed is adjustable.