C.R. Laurence Architectural Products and Services

08 7100 CRL-Blumcraft® Access Control Handles

Panic Handles | Deadbolt Handles | Electronic Egress Control Handles | Dummy Handles | Balanced Door Panic Handles
08 7100 CRL-Blumcraft® Panic Handles
For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors
1 of 5 ↓
CRL-Blumcraft® manufactures a complete line of Panic Handles designed with the 'all-glass' door in mind. These elegant tubular devices give you maximum viewing area and a contemporary look, while remaining A.D.A. compliant. The operating mechanism is completely concealed within the tube, and retracts a roller latch bolt at the top of the door when pushed gently. NOTE: Models also available for floor latching.


08 7100 CRL-Blumcraft® Deadbolt Handles

For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors

2 of 5 ↓
CRL-Blumcraft® manufactures a complete line of UL Classified Deadbolt Handles designed to complement our popular line of Panic Handles. They offer easily accessible locking hardware for 'all-glass' doors in an elegant tubular device, while maximizing your viewing area. The interior portion of the device is a slender 1-1/4" (32 mm) tube stretching across the door and then gently turning upwards to the top of the door. The locking hardware is completely concealed within the tube. The top deadbolt retracts with just a simple turn of a key or thumbturn conveniently located just above the horizontal portion of the Handle. NOTE: Models also available for floor locking.


08 7100 CRL-Blumcraft® Electronic Egress Control Handles

For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors

3 of 5 ↓
CRL-Blumcraft® Electronic Egress Control Handles are an economical method to control access into, and safe exit from, areas that call for security and still maintain the beauty and view of an 'all-glass' door that is A.D.A. compliant. An Electronic Switch is completely concealed within the tube and releases a Magnetic Lock at the top or bottom of the door when gently pushed.


08 7100 CRL-Blumcraft® Dummy Handles

For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors

4 of 5
When functionality is not required, our Dummy Handles can be made to match any of our Panic, Deadbolt or Electronic Egress Handles, giving you the same appearance throughout your project. C.R. Laurence's experienced Manufacturing Division can also create custom Dummy Handles to meet design demands.


08 7100 CRL-Blumcraft® BP100 Series Panic Handles for Balanced Doors

For 1/2" or 3/4" (12 or 19 mm) Tempered Glass Doors

5 of 5
CRL-Blumcraft Balanced Door Panic Handles were created to meet the building code requirements for Balanced Doors, while maintaining an excellent appearance. The building code states that the push pad shall not extend more than one-half the width of the door measured from the latch side, and this creates an undesirable appearance. Our DBA100 Series has a fixed handle portion that extends toward the hinge side of the door, with a clearly defined push pad handle portion at the latch side of the door. This wider handle has greatly improved aesthetics over a handle that only spans one-half of the door's width.

C.R. Laurence Company Co., Inc.   |   2503 E. Vernon Ave. Los Angeles, CA 90058
Toll Free Phone: (800) 421-6144   |  Toll Free FAX: (800) 262-3299   |  info@crl-arch.com
                 
ABOUT CRL | BUSINESS POLICIES