C.R. Laurence Architectural Products and Services
08 4100 Entrances and Storefronts
08 4113 CRL-U.S. Aluminum Series 400 & 450 Center Glaze Storefront Systems
1/4" or 3/8" (6 or 10 mm) Glazing Infills
1 of 7 ↓
- Series 400 - 1-3/4" x 4" (44.5 x 101.6 mm)
- Series 450 - 1-3/4" x 4-1/2" (44.5 x 114.3 mm)
- Injection Molded Water Deflectors
- Interior or Exterior Glazed
- Screw Spline or Shear Block Assembly
CRL-U.S. Aluminum offers cost efficient versatile Center Glazed Systems with clean lines and superb performance. All series may be interior or exterior glazed. A top load E.P.D.M. gasket is used to position and weatherseal the glass in the aluminum pocket. Center Glazed Systems are compatible with most U.S. Aluminum Entrance Doors.
08 4113 CRL-U.S. Aluminum Series 451 & IT451 Center Glaze Storefront Systems
1" (25 mm) Glazing Infills
2 of 7 ↓
- Series 451 - 2" x 4-1/2" (50.8 x 114.3 mm) Non-Thermal
- Series IT451 - 2" x 4-1/2" (50.8 x 114.3 mm) Thermal
- Screw Spline or Shear Block Assembly
- Stacking Installation Option
Series IT451 offers improved thermal performance using the Poly-Aluminizer™ and Lancer™ Thermal Break Technology. Series 451 and IT451 may be interior or exterior glazed. A top load E.P.D.M. gasket is used to position and weatherseal the glass in the aluminum pocket. Center Glazed Systems are compatible with all U.S. Aluminum Entrance Doors.
08 4113 CRL-U.S. Aluminum Flush Front™ Storefront Systems
Flush In, Flush Out, or Combination Glazing
3 of 7 ↓
- Exterior or Interior Glazed
- Ground Floor to Mid-Rise
- Factory Pre-Punched Weep Slots
Flush Front™ Systems feature screw race joinery and panel type installation, which allows for shop or job site fabrication. Injection molded water deflectors at intermediate horizontals, and a continuous sill gutter with factory pre-punched weep slots, ensure control of any infiltrated water. The plane of the glass may be reversed from exterior to interior or any combination to give these standard systems a custom look. Flush Front™ is ideal for use in storefront and punched opening or ribbon window applications. Series FT Systems offer improved thermal performance using the Poly-Aluminizer™ and Lancer™ Thermal Break Technology.
08 4113 CRL Monterey Bi-Folding Glass Wall System
For Use with 1/4", 3/8" or 1/2" (6, 10, or 12 mm) Monolithic; and 1" (25 mm) Insulating Glass
4 of 7 ↓
- Weather Resistant, Designed for Exterior Use
- Inward or Outward Stacking Positions Available
- Fully Assembled, Ready for Glazing
- Wood Grain and White Powder Coat Standard With Custom Colors Available
The Monterey Series allows you to bring the outdoors inside while providing resistance to undesirable weather conditions. Countless options are available to create large living spaces that seamlessly transition outdoors to indoors. Our precision engineered components provide a system that slides smoothly with minimal effort while supporting up to 10 panels in a single opening. The Monterey Series provides security with multi-point locks that engage with a simple turn of the handle.
08 4313 CRL-U.S. Aluminum BG & BT Window Wall Systems
1/4"or 1"(6 or 25 mm) Glazing, 2-1/4"(57 mm) Face Dimension
5 of 7 ↓
- Low to Mid-Rise Applications
- No Exposed Fasteners
- Two-Tone Color Option
- Stacking Installation
Our BG and BT Systems are vertically butt glazed horizontal ribbon window systems that are ideal for low to mid-rise applications. The BG and BT Systems are engineered for continuous long runs of glass creating a monolithic appearance. Intermediate horizontals can be added for accenting horizontal bands. The BT Series features the Poly-Aluminizer™ and Lancer™ Thermal Break Technology. These systems can be glazed from the interior or exterior.
08 4313 CRL-U.S. Aluminum OS-2 Offset Glazing Window Wall System
1/4", 3/8" or 1" (6, 10 or 25 mm) Glazing, 2" (50.8 mm) Face Dimension
6 of 7 ↓
- Glass Offset to Front
- Butt Glazed Vertical Option
- Continuous Head and Sill
- Top Load Gasket
OS-2 Offset Glazing System Framing offers a shallow face reveal creating a flush exterior appearance. OS-2 is designed for labor-saving stacking type installations, and may be interior or exterior glazed using top load E.P.D.M. glazing gaskets. Internal water deflectors at intersections of intermediate horizontal and vertical mullions allow infiltrated water to be drained into a continuous sill gutter and weeped to the exterior.
08 4313 CRL-U.S. Aluminum Top Notch Window Wall Systems
1" (25 mm) Glazing Infill
7 of 7
- Series TN451 & TT451 Utilize Top Load Gaskets
- Series TN601 & TT601 Utilize Wedge-Type Molded Corner Exterior Sponge Gaskets
The Top Notch Systems offer a shallow face reveal that creates a flush exterior appearance. These systems are designed for labor saving stacking type installations that require glazing from the interior. Internal water deflectors at intermediate horizontal to vertical intersections allow infiltrated water to be drained into a continuous sill gutter and weeped to the exterior. The Top Notch Systems are designed for fixed horizontal window wall or punched opening applications.