08 5000 Windows

08 5113 CRL-U.S. Aluminum Series 7200 & 7300 Windows
2" (50.8 mm) Depth; Projected, Fixed, or Casement
1 of 8 ↓
  • Polyurethane Thermal Break
  • C-70 Rated (Series 7200 Operable)
  • C-90 Rated (Series 7200 Fixed)
  • HC-75 Rated (Series 7300 Operable and Fixed)

Series 7200 and 7300 Windows are dry glazed with tape at the outside and E.P.D.M. elastomeric wedge on the inside. Vent construction is accomplished with tubular members, mitered and reinforced with an extruded aluminum corner key, and hydraulically crimped. Operating hardware options include 90° egress Four-Bar Hinges, 5 or 3 Knuckle Butt Hinges, Roto Operators, Friction Adjusters, and Stop Limit Arms. Locking hardware options include Cam Locking Handles, Two-Point Locking Handles, and Security Locks.

08 5113 CRL-U.S. Aluminum Series 7400 Operable Window
2-1/4" (57 mm) Depth; Projected, Fixed, or Casement
2 of 8 ↓
  • AW-75 Rated (Operable and Fixed)
  • Multitude of Hardware Options
  • Flush Sash With Frame Design
  • 90° Corners, Compensation Channels, Starter Sills, and Sill Flashing

The Series 7400 Window was successfully tested to ANSI/AAMA/NWWDA-1011.5 2-97 requirements. This Window is constructed using extruded tubular members mitered and crimped with corner keys. These windows are offered in projected, fixed, and casement configurations. Series 7400 also features the Poly-Aluminizer™ Thermal Break Design to provide maximum thermal properties.

08 5113 CRL-U.S. Aluminum Series 7500 Concealed Vent Window
1/4" or 1" (6 or 25 mm) Glazing
3 of 8 ↓
  • C-75 Rated
  • Structural Silicone Glazed
  • Polyurethane Thermal Break

The Series 7500 is a minimal sightline Operable Window perfect for use in storefront and curtain wall openings. Stainless steel Four-Bar Hinges and Cam Locking Handles complete the standard hardware. Vent construction is accomplished with tubular vent components, mitered, reinforced with corner keys, and crimped at all corners. When closed, the vent is sealed to the frame with Santoprene bulb gaskets, ensuring an air tight seal. Blast and Hurricane Resistant Versions available.

08 5113 CRL-U.S. Aluminum Series 7600 Concealed Vent Window
1" (25 mm) Glazing; U-Factor 0.56 to 0.34
4 of 8 ↓
  • AAMA CW100-Rated
  • Structural Silicone Glazed
  • Thermally Broken
  • Multi-Point Euro Hardware Locking Handles

The Series 7600 Concealed Vent is a minimal sightline window perfect for use in Storefront and Curtain Wall openings. Standard hardware includes a single Multi-Point Locking Handle. Vent construction starts with tubular vent components that are Mitered, Reinforced with Corner Keys, and Crimped at all corners. When closed, the vent is sealed to the frame with bulb gaskets ensuring an air tight seal. Blast and Hurricane Resistant Versions available.

08 5113 CRL-U.S. Aluminum Series 8000 Single Hung Window
1" (25 mm) Glazing; U-Factors as Low as 0.34
5 of 8 ↓
  • Tested to AAMA CW60
  • Thermally Insulated-NFRC Certified
  • Choice of Block or Fin Frame
  • Complemented by the 8200 Horizontal Sliding and 8100 Fixed Windows

The 8000 Single Hung Window uses a Class 5 Balance for smooth operation. The 4-1/2" (114 mm) deep frame is designed to match typical building conditions, including our entrances and storefront. An efficient thermally insulated frame accepts 1" (25 mm) glazing, with extruded pulls at the interlock and bottom rail. The window features a self-locking latch.

08 5113 CRL-U.S. Aluminum Series 8100 Fixed Window
1" (25 mm) Glazing; U-Factors as Low as 0.34
6 of 8 ↓
  • Tested to AAMA CW60
  • Thermally Insulated-NFRC Certified
  • Choice of Block or Fin Frame
  • Mulling Bars, Subsills, Head and Jamb Channels Available

The Series 8100 Fixed Window has a 4-1/2" (114 mm) deep frame designed to match typical building conditions, including our entrances and storefronts. An efficient thermally insulated frame accepts 1" (25 mm) glazing. Available in an array of architectural coatings and anodized finishes.

08 5113 CRL-U.S. Aluminum Series 8200 Horizontal Sliding Window
1" (25 mm) Glazing; U-Factors as Low as 0.34
7 of 8 ↓
  • Tested to AAMA CW60
  • Thermally Insulated-NFRC Certified
  • Self Locking Latch and Tandem Adjustable Rollers
  • Choice of Block or Fin Frame
  • Dry Glazed

The 8200 Horizontal Sliding Window offers that rare combination of smooth operation, durability, and toughness. It has a 4-1/2" (114 mm) deep frame designed to match typical building conditions, including our entrances and storefronts. An efficient thermally insulated frame accepts 1" (25 mm) glazing. Available in an array of architectural coatings and anodized finishes.

08 5113 CRL-U.S. Aluminum Series ET350 Strip Window
1" (25 mm) and 1/4" (6 mm) Glazing; U-Factors as Low as 0.33
8 of 8
  • Thermally Insulated-NFRC Certified
  • 3-1/2" (88.9 mm) Deep Frame
  • Screw Spline Assembly
  • Ideal for Horizontal Strip Windows or Punched Openings and Can Accommodate Operable Windows
  • Rainscreen Option
  • Meets or Exceeds Highest Performance Levels of CSA Standards
  • Non Thermally Broken ES350 Configuration Available

The Series ET350 offers a shallow face reveal that creates a flush exterior appearance. This system was designed for multi-panel strip window installation. It is interior glazed using exterior glazing tape and an interior wedge gasket. Pre-shimmed butyl glazing tape combines the quality of a butyl tape with the added longevity of the internal EPDM rod to resist squeeze out. The system also features simple joinery with overlapping flanges for economical construction and good weathering resistance.

08 5113 CRL-U.S. Aluminum Series IW7500 Hurricane Resistant Concealed Vent Window
1" (25 mm) Laminated Glazing
8 of 11
  • Thermally Broken
  • AAMA CW100 Rated Window
  • Structural Silicone Glazed

The Series IW7500 Hurricane Resistant Concealed Vent is a minimal sightline out-swing thermally broken window perfect for use in storefront, window wall, and curtain wall openings in coastal areas requiring Hurricane Resistant Systems. Stainless Steel 4-Bar Hinges and Cam Locking Handles complete the heavy-duty hardware used on the Hurricane Resistant Window. When closed, the vent is sealed to the frame with E.P.D.M. bulb gaskets ensuring an air tight seal.

08 5113 CRL-U.S. Aluminum Series IW8000 Hurricane Resistant Single Hung Window
1-5/16" (33 mm) Glazing
9 of 11
  • Thermally Insulated - NFRC Certified
  • AAMA CW60 Rated Window
  • Class 5 Balance for Ease of Operation

The IW8000 Hurricane Resistant Single Hung Window offers a 4-1/2" (114 mm) deep frame designed to match typical building conditions, including our entrances and storefront. An efficient thermally insulated frame accepts 1-5/16" (33 mm) glazing, with extruded pulls at the interlock and bottom rail. The high performance IW8000 Window is both AAMA CW60 Rated and NFRC Certified and meets the stringent requirements of the Miami/Dade County protocol for maximum protection from high winds and wind-borne debris.

08 5113 CRL-U.S. Aluminum Series IW8100 Hurricane Resistant Fixed Window
For 1-7/32" (31 mm) Glazing
10 of 11
  • Tested to AAMA CW60
  • Thermally Insulated - NFRC Certified
  • U-Factors as Low as 0.34
  • 4-1/2" (114 mm) Deep Frame to Match Typical Building Conditions

The Series IW8100 Fixed Window offers that rare combination of durability and toughness to meet stringent requirements of the Miami/Dade County Protocols TAS 201, 202, and 203 for maximum protection from high winds and wind-borne debris.

08 5113 CRL-U.S. Aluminum Series IW8200 Hurricane Resistant Horizontal Sliding Window
For 1-7/32" (31 mm) Glazing
11 of 11
  • Tested to AAMA CW60
  • Thermally Insulated - NFRC Certified
  • U-Factors as Low as 0.34
  • 4-1/2" (114 mm) Deep Frame to Match Typical Building Conditions
  • Self-Locking Latch and Tandem Adjustable Rollers for Ease of Operation

The IW8200 Horizontal Sliding Window offers that rare combination of smooth operation, durability, and toughness to meet stringent requirements of the Miami/Dade County Protocols TAS 201, 202, and 203 for maximum protection from high winds and wind-borne debris.